Home page | Archivio Promozioni | Current page: Milan, November 7-10: EICMA

Milan, November 7-10: EICMA

Mupo Srl, the manufacturer of suspensions for sport and racing bikes, is back at EICMA (International Cycle and Motorcycle Show) with its new products (Pavilion 6 Booth H 38).

Three new products are presented in the current edition of EICMA: Cartridge K911, Super Bike Fork and Bike Fork 3.

Cartridge K911. This new cartridge has been developed thanks to the experience acquired during the races supported by us. The two main technical features are the piston diameter and the K911 system. The 30 mm piston can guarantee an excellent progressive rebound for having an “infi nite” setting possibilities. This characteristic can satisfy any use of bikers. The K911 is a new mechanic system that allows varying the spring elastic constant in the fork without physical replacement of the spring. This solution guarantees the possibility to obtain diverse suspension rigidities. It offers to the rider many setting possibilities in any conditions. Another important technical feature offered by system K911 is the possibility to modify the spring stiffness simply, in a very short time, without replacing components.

These modifi cations can be executed in a very short time lap, for example it takes

few seconds from the race start to establish a new set-up of the motorbike if the weather conditions modify (dry-wet). This system will be available for a widerange bike models together with a special kit for the Mupo cartridge up-dates (where possible) already used by our customers.

Super Bike Fork. The Fork, which comes with a 43-45 diameter stem, has been designed for high-performance bikes (1000 c.c.- Bike 2 – etc.). Some of its most relevant features are its multiple settings, such as high and low speed compression, spring pre-loading, extension, oil level. In order to improve smoothness, the fork stems have a cover in CVD (Laf. Diamond), rods, liners and internal cartridges are all anodized and lapped to reduce the coefficient of friction. The fork feet are made in Ergal with CNC technology from a study and design in 3D Cad and FEM analysis for the right sizing and maximum light-weight quality. Technical Features: Settings: Spring Pre-loading, Compression adjuster, A.v. Compression adjuster, B.v. Compression adjuster, Extension adjuster, Oil level adjuster, Hard Anodized 40micron Liners + Ra 0.08 Lapping, 43-45 d. Stem with CVD treatment (Laf. Diamond 10000 HV), Attachment of radial caliper int.108, Travel int. 120mm, Mudguard Attachment.(Ergal steering plates made from solid can be provided on request.)

Bike Fork 3- Construction features: - made completely in Ergal with CNC machining and stems of 38-mm diameter in steel with DLC treatment to reduce friction and increase surface hardness. - D.U. Bushings in graphite loaded Ptfe for a low sliding friction and maximum grip, cartridge of 25-mm diameter in hard anodized and lapped Ergal (35 micron), 12-mm diameter stem in rectified and hard anodized Ergal. - Cr.Si. Steel springs available in elastic constant (K) from 0.55 to 0.65. - 60-mm wheelbase calipers adjustable in 40-setting extensions, in 40-setting compression and in 30-setting (15 mm) spring pre-loading. Available in 645-mm length with maximum internal travel of 120 mm, or 635 mm with maximum internal travel of 98 mm. Set for telemetry. Also available in monodisc version for PreGp.
To stay up to date subscribe to our Newsletter
Mupo Srl - Via dell'Artigianato, 34 - Castel Guelfo di Bologna
(Z.I. Poggio Piccolo) - Bologna (Italy) - Italy
Tel. +39 0542671860 - Fax +39 0542671858 - info@mupo.it
P. Iva 03006561207 - Management and coordination Roberto Nuti Spa

Privacy Policy
Social following

Powered by
Punto Triplo Srl